Residential · Montgomery, AL
Need a pool fence that latches clean, stands plumb, and holds up to daily use. Frontier Fences Montgomery has served Montgomery since 2018, installing and repairing aluminum, vinyl, and chain-link pool enclosures with self-closing gates and code-ready hardware.
A solid pool fence starts with layout and base prep. We verify property lines, mark gate swings and latch heights, and confirm fence height and picket spacing before we dig. Posts are set in properly sized holes with compacted base, aligned with string lines, then set in concrete and checked for plumb so panels and gates hang true without rubbing. For repairs, we diagnose the cause first, loose posts, heaved footings, hinge sag, or bent rails, then reset or reinforce the base before swapping parts.
Pool areas in Alabama see heavy sun, splash-out, fertilizer overspray, and shifting soil around deck edges, so material choice and finish matter. Powder-coated aluminum is a common pick for corrosion resistance near chlorinated water, while vinyl works well when you want privacy in adjacent sections, and black vinyl-coated chain-link can be a budget-friendly option with visibility. We watch for drainage patterns that can wash out post holes, keep clearances tight at slopes and retaining walls, and use stainless or coated fasteners where needed. Gates get weather-rated hinges and latches, and we tune closing speed so the gate reliably self-closes from any open position.
Customers around Montgomery choose us because we treat pool fencing like a safety system, not just a boundary. You get clear recommendations on height, gate count, latch placement, and safer access points, plus straightforward options for pet-friendly spacing and climb-resistant layouts. Our crews show up with the right augers, levels, and gate hardware to finish cleanly, and we keep the work area controlled around pools, decks, and landscaping. As a licensed and insured contractor, we provide a written scope, confirm measurements on site, and communicate schedule changes before they become problems.
At closeout we walk the full perimeter with you and test every gate: swing, self-close, and latch engagement. We verify panels are secure, posts are plumb, hardware is tight, and there are no sharp edges, gaps, or loose pickets that create a hazard. You receive a free written estimate up front, then a documented install or repair plan, material specs (aluminum, vinyl, or chain-link), and care guidance for hinges, latches, and finishes. If we repaired an existing pool fence, we show what failed, what was replaced, and what to monitor so the fix stays reliable season after season.
Yes. Frontier Fences Montgomery is licensed and insured, and we provide a clear written estimate before scheduling work.
Yes. We provide a free written estimate after an on-site measure so footage, gates, and site conditions are accounted for.
Many residential projects can be completed in 1-3 days once materials are on hand, depending on footage, number of gates, and grade changes. We give a realistic schedule in your estimate.
Pressure-treated wood privacy fencing, galvanized chain-link, and powder-coated aluminum are the most common. We also handle walk gates, driveway gates, and repairs for all three.
Usually. We evaluate post spacing, height, picket style or chain-link fabric, and hardware so the new section ties in cleanly, then recommend the closest material match available.
A properly built pool fence should do three things every day: create a continuous barrier, close behind you, and latch securely without effort. Frontier Fences Montgomery installs and repairs pool fence systems designed for high-traffic pool areas, including aluminum pool fencing, vinyl fencing, and chain-link options with visibility. Whether you need a new enclosure, a safer gate setup, or a sagging section corrected, we focus on tight tolerances, dependable hardware, and a finished look that matches the rest of your property.
Pool fence installation starts with a measured layout for straight runs and safe gate placement. We set posts to consistent spacing, verify height and picket gaps, and build corners and end posts to handle gate loads. For aluminum systems, we install powder-coated panels and racks (when needed) to follow grade changes without creating large gaps at the bottom. For vinyl, we reinforce posts where gates hang and use exterior-rated hardware to reduce long-term hinge drift. Chain-link pool fence work includes properly tensioned fabric, terminal posts, and smooth top rails with secure fittings.
Pool fence repair is often about restoring function at the gate and restoring stability at the posts. Common fixes include resetting a post that has shifted, replacing worn hinges or a latch, tightening rails or brackets, correcting out-of-square sections, and replacing damaged panels after storms or impacts. If your gate does not self-close consistently, we adjust hinge tension, check for racking, and correct the latch alignment so it catches every time without slamming.
If you are planning a new pool fence or need an existing enclosure made safer, we will walk the site with you, discuss material and visibility preferences, and provide a written plan with pricing. You will know where gates go, what hardware is being used, and what the finished system will look like before work begins. Schedule an on-site visit to get a free written estimate for pool fence installation and repair in Montgomery.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Montgomery. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
