Commercial · Montgomery, AL
Protect doors, roll-up bays, fuel pumps, and pedestrian paths with properly set bollard posts. Frontier Fences Montgomery has served Montgomery since 2018, installing and repairing steel and concrete-filled bollards for businesses, HOAs, and homeowners.
A bollard does its job only if the base is engineered and installed correctly. We start by locating utilities (811) and confirming the spacing and setbacks you need for ADA paths, curb lines, and equipment access. For set-in-ground posts we core-drill or excavate to the right diameter and depth (often 24-48 inches depending on soil and impact risk), place the post plumb, then pour high-strength concrete and consolidate it to reduce voids. For surface-mounted bollards, we verify slab thickness and condition, lay out the pattern, then drill for wedge anchors or epoxy-set threaded rods to match the base plate and torque requirements.
Montgomery weather and site conditions matter, especially clay soils, heavy rain, and high heat that can affect cure times and drainage around the footing. We build the top finish for longevity by crowning the concrete, sealing joints where needed, and setting bollards with caps to keep water out. For visibility and compliance, we install high-visibility safety yellow coatings, reflective bands, or powder-coated sleeves, and we can add removable bollards with lockable sockets where access is needed for fire lanes, dumpsters, or delivery paths. If you are repairing damage, we can cut out bent posts, remove failed anchors, and rebuild the base so the replacement does not loosen over time.
Customers across Montgomery choose us because we install bollard posts like protective infrastructure, not like landscaping. You get clear recommendations based on impact risk, vehicle type, and traffic flow, whether that calls for schedule 40 steel, heavier wall pipe, concrete-filled cores, or sleeve systems. Our crews show up with the right equipment for clean work, including core drills, rotary hammers, rebar cutters, levels, and concrete mixing and finishing tools, and we protect your site with safe staging and tidy cleanup. Frontier Fences Montgomery is licensed and insured, and we provide straightforward scheduling and a written estimate before we start.
At the end of the job, we do a walkthrough to confirm placement, spacing, and clearances for doors, walkways, and turning radiuses. We check plumb, cap fit, coating coverage, and base integrity, and we review any cure-time limitations before vehicles can contact the area. You receive a written scope showing the bollard type, install method (set-in-ground or surface-mount), materials used, and any maintenance notes such as touch-up paint and periodic anchor checks. If your needs change, we can plan additional posts, removable sections, or matching perimeter fencing so the protection works as one system.
Yes. Frontier Fences Montgomery is licensed and insured, and we provide a clear written estimate before scheduling work.
Yes. We provide a free written estimate after an on-site measure so footage, gates, and site conditions are accounted for.
Many residential projects can be completed in 1-3 days once materials are on hand, depending on footage, number of gates, and grade changes. We give a realistic schedule in your estimate.
Pressure-treated wood privacy fencing, galvanized chain-link, and powder-coated aluminum are the most common. We also handle walk gates, driveway gates, and repairs for all three.
Usually. We evaluate post spacing, height, picket style or chain-link fabric, and hardware so the new section ties in cleanly, then recommend the closest material match available.
Bollard posts are a simple way to prevent vehicle strikes, control traffic, and protect people and property at storefronts, warehouses, drive-thrus, loading areas, and residential driveways. Frontier Fences Montgomery installs new bollards and repairs damaged posts with a focus on footing strength, straight layout, and finishes that hold up to Alabama heat and rain. Whether you need a few protective posts by a garage door or a line of impact barriers along a sidewalk, we build the system around your site and risk level.
Most bollard failures come from shallow embedment, undersized holes, poor concrete consolidation, or anchors installed into weak concrete. We correct those issues by verifying slab condition or digging and forming a footing sized for the expected impact and soil conditions. For surface mounts, we use the correct anchor type for the application, confirm edge distances, and tighten to spec so base plates do not rock. For embedded posts, we set the bollard plumb, backfill and pour with proper mix and finish the top to shed water.
If you already have bollard posts that are leaning, rusting, or hit by a vehicle, we can remove and replace only what is needed, or rebuild the layout to improve protection. Common upgrades include adding concrete-filled posts, installing sleeves to refresh appearance, swapping to removable bollards at access points, and adding reflective markings to improve nighttime visibility. We can also coordinate bollards with fencing and gates so your perimeter control is consistent.
For pricing and lead time, the biggest drivers are the install method, the number of posts, concrete or slab conditions, coating requirements, and access for equipment. Share a few photos and the goal for the area, and we will provide a free written estimate with a clear scope for bollard posts in Montgomery, AL.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Montgomery. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
